當前位置：首頁 > 450噸錫線擠壓生產設備 > 高速重型拉絲機
咨詢熱線
+860-20-32388019
+860-751-5559268
拉絲塔輪采用陶瓷工藝，保證表面的硬度，耐磨性和光潔度
Drawing tower wheels are made with ceramic technology, ensuring surface hardness, wear resistance and smoothness.
拉絲規格：ф5.5-ф2.0
Drawing specifications: ф5.5-ф2.0
各軸之間采用齒形皮帶傳動
Gear belts are used for transmission between each axis.
機器設有冷卻和加熱系統，保證恒溫拉絲
The machine is equipped with cooling and heating systems to ensure constant temperature drawing.
有獨立的拉絲液過濾裝置
There is an independent drawing fluid filtration device.
有斷線保護急停及前端引入裝置
There is a wire break protection emergency stop and front-end introduction device.
有后端盤線裝置
There is a back-end wire winding device.
地址：廣州市黃埔區茅崗路828號廣州機械科學研究院30號樓
GUANGZHOU JINGZHUN MACHINERY CO., LTD.
Guangzhou Mechanical Engineering Research Institute，No. 828, Maogang Road, Huangpu District, Guangzhou
地址：廣東省樂昌市經濟開發區環園東路17號
JINGXIN(LECHANG) MACHINERY CO., LTD.
No.17, Huanyuan East Road, Lechang Economic Development District, Guangdong
電話：+860-20-32388019 / +860-751-5559268
傳真：+860-20-32388021
郵箱：gdjzjx@163.com
網址：gzjingzhun.com
版權所有 廣州精準機械有限公司 備案號： 粵ICP備13027984號